Waterproof Custom BBQ Covers Made to Measure

Filters and sort order

3 Items

Filter by

Gas barbecue cover

from 20,81 € *

Configurable

More Colors Available

Gas barbecue cover

0,00 € *

Configurable

Gas barbecue cover

from 45,36 € *

Configurable

More Colors Available

A fit you can see

Fits every type of barbecue

Made to measure bbq cover in anthracite over a barbecue trolley on a paved patio

Trolley, smoker or kettle: the cover is sewn to your appliance and sits taut, without flapping. Tension straps and a drawcord in the hem hold it in place, and the ventilated construction keeps trapped heat and condensation from building up underneath.

For every type

Covers by barbecue type

Barbecues rarely come in standard sizes - a gas barbecue with a side burner needs a different cover than a smoker, a kettle or a trolley. We make every barbecue cover individually, with no minimum order. Several covers for an outdoor kitchen are sewn to fit just as precisely.

Gas barbecue

For gas barbecues with a lid, side burner and cabinet - hoses and side shelves are enclosed precisely.

Smoker

A smoker cover for barrel and offset smokers protects the chimney, firebox and steel from rust and weather.

Kettle & ceramic barbecue

A round cover for kettle and ceramic barbecues - keeps moisture out of the cooking chamber and protects the stand.

Trolley & outdoor kitchen

Large made to measure covers for barbecue trolleys and fixed outdoor kitchens - including corner runs and cut-outs. For special shapes, simply upload a sketch.

Waterproof and ventilated by design

Fabric & properties

A good barbecue cover has to do two things at once: keep rain out and still be ventilated, so that no condensation forms and the grate does not rust underneath. We do not solve this with a "breathable" fabric but through the construction: we sew from Cover-PVC, a vapour-tight, PVC-coated polyester fabric with a 4,000 mm water column - so it really is waterproof. Ventilation comes from at least two concealed vents under flaps and fabric folds, plus a defined ground clearance of at least 5 cm, so moisture escapes and the steel stays dry. Seams are carefully sewn and, on request, additionally sealed with welded tape; the hem carries tension straps and a drawcord. Made to measure means the cover sits close.

So the cover fits

How to measure correctly

The most common worry with a made to measure cover is that it will not fit in the end. Three measurements and a few simple steps are all it takes - and if in doubt, we check your measurements together before production.

Measure width, depth and height

Measure at the widest and highest point - including side shelves, handles and the lid closed.

Allow for an overhang

An overhang of a few centimetres lets rain drip off and keeps the cover from dragging on the ground.

Choose the fastening

The standard is tension straps with click buckles plus a drawcord in the hem - storm-proof around legs or corner points, instead of elastic that goes slack or single eyelets that tear out.

More protection made to measure

Matching covers

For the barbecue area and beyond we sew made to measure covers for many areas around the house and garden.

Gas barbecue covers

A cover shaped specifically for gas barbecues - with room for side burners, hoses and shelves.

To gas barbecue covers

Smoker covers

A cover for barrel and offset smokers - with room for the chimney and the firebox set off the cooking chamber.

To smoker covers

Kettle barbecue covers

A round cover for kettle, ceramic and kamado barbecues - sewn to diameter and height.

To kettle barbecue covers

All covers made to measure

The overview of our complete range of made to measure covers and protective covers.

To the overview

Garden furniture covers

Made to measure covers for swing seats, beach chairs, tables, chairs, benches and loungers.

To garden furniture

Hot tub covers

Ventilated protective covers for outdoor hot tubs and swim spas.

To hot tub covers

Equipment covers

Made to measure covers for heat pumps and outdoor units - weather protection all year round.

To equipment covers

Winter protection for plants

Textile winter covers for potted plants and olive trees - breathable frost protection in fleece.

To winter protection

Frequently asked questions

Frequently Asked Questions

What matters is the combination of waterproofing and ventilation. We sew from Cover-PVC, a vapour-tight, PVC-coated polyester fabric with a 4,000 mm water column - it really is waterproof. To stop condensation and rust forming underneath, ventilation comes from the construction: at least two concealed vents and a defined ground clearance of at least 5 cm keep the air moving. The fabric is also UV-stable, lightfast (grade 7-8), abrasion-resistant (60,000 Martindale cycles) and tested to OEKO-TEX Standard 100.

Yes. For year-round outdoor use we sew the cover from Cover-PVC, a heavy, tear-resistant and abrasion-resistant fabric that withstands frost, wind and snow load. The ventilated construction matters here too - concealed vents and ground clearance - so the barbecue stays dry underneath and does not rust.

Measure width, depth and height at the widest and highest point - including side shelves, handles and the lid closed. Allow a small overhang so rain drips off. On request we check your measurements together before production, so the finished cover fits.

Yes, if the barbecue lives outdoors. A cover protects against rain, rust, UV light, leaves and bird droppings, and it extends the life of the appliance considerably. A made to measure cover sits closer than a standard one and therefore protects more reliably.

No. We make every barbecue cover as a one-off to your measurements - including special shapes such as corner outdoor kitchens. You order exactly one cover, matching exactly your appliance.

Most of our fabrics repel dirt and grease and can simply be rinsed off with water or wiped down. Let the cover dry thoroughly before storing it to avoid mildew stains. That keeps the cover working season after season.