Garden chair covers

  • Made to measure: sewn to your chair model exactly
  • Single, or as one cover for a stack of chairs
  • Waterproof, winter-proof Cover-PVC
  • Ventilated construction prevents condensation
  • Held securely with tension straps and a drawcord

Item currently out of stock
Currently out of stock
Garden furniture covers made to measure

Garden chair covers
sewn to your measurements

Your garden chair cover made to measure - waterproof, ventilated by design and winter-proof. We sew every cover to your model: single, or as a slim stack cover for several chairs. Garden chair covers waterproof and shaped to fit do not flap and reliably protect weave, cushions and frame - in vapour-tight Cover-PVC, with tension straps and a drawcord instead of elastic that goes slack.

A fit you can see

Shaped for your chairs

Made to measure garden chair cover in anthracite over a garden chair in the garden

Single or as a stack cover for several chairs: the cover is sewn to your model and sits taut, without flapping. Tension straps and a drawcord hold it to the chair, and the ventilated construction keeps moisture from building up underneath.

Shaped for your chairs

What sets this cover apart

Garden chairs come as stacking chairs, high-backs, recliners or woven chairs. An off-the-shelf patio chair cover rarely fits - we sew every cover individually to your measurements, whole stacks included.

Single or as a stack

Cut slim for a single chair, or as a stacking chair cover tall enough for a whole stack - without loose material flapping about.

Reinforced seams

Double-sewn hems keep the chairs dry even in prolonged rain.

Secure fastening

Tension straps with click buckles plus a drawcord in the hem hold the cover close to the chair in wind - storm-proof instead of elastic that goes slack.

Waterproof and ventilated by design

Fabric & properties

A good chair cover has to keep rain out reliably and still be ventilated, so that no condensation forms. We do not solve this with a breathable fabric but through the construction: we sew from Cover-PVC, a vapour-tight, PVC-coated polyester fabric with a 4,000 mm water column - so it really is waterproof. Ventilation comes from concealed vents and a ground clearance of at least 5 cm, so moisture escapes without letting rain in.

So the cover fits

How to measure your garden chairs

A few measurements are all it takes - and if in doubt, we check them together before production.

Measure width, depth and height

Measure at the widest and highest point - including armrests and backrest.

Give us the stack height

If several chairs are to be protected stacked, measure the height of the finished stack.

Allow for an overhang

A small overhang carries rain away and stops the cover dragging on the ground.

Frequently asked questions

Frequently Asked Questions

What matters is the combination of waterproofing and ventilation. We sew from Cover-PVC, a vapour-tight, PVC-coated polyester fabric with a 4,000 mm water column - it really is waterproof. To stop condensation forming underneath, ventilation comes from the construction: concealed vents and a ground clearance of at least 5 cm keep the air moving so moisture escapes. The fabric is also UV-stable, lightfast (grade 7-8), abrasion-resistant (60,000 Martindale cycles) and tested to OEKO-TEX Standard 100.

Yes. We sew made to measure stack covers that protect several stacked chairs in one piece. For that, measure the height of the finished stack plus the width and depth of the chairs.

Yes. Cover-PVC is abrasion-resistant (60,000 Martindale cycles) and UV-stable and withstands frost, wind and snow load. The ventilated construction matters here too - concealed vents and ground clearance - so the chairs stay dry underneath.

No. We make every garden chair cover as a one-off to your measurements - single or as a stack cover. You order exactly one cover.

Most of our fabrics repel dirt and can simply be rinsed off with water or wiped down. Let the cover dry thoroughly before storing it to avoid mildew stains.

Unsure about size or fabric?

Order a fabric sample or ask for advice - we check your measurements and find the right fabric for your made to measure garden chair cover together.

Information on product safety

Name: GERMES GmbH
Address: Lüke-Smidt-Straße 19
Zip code, Prt: 26810 Westoverledingen
Country: Germany
E-Mail: info@germes.com
Web: https://www.germes.com

How do you like Garden chair covers?

Write the first review for this item and help others make a purchase decision!:

Notify me when this item is available
All fields marked with * are mandatory fields.

Please see our privacy notice