We have collected here all worth knowing and useful information relevant to this product.
Custom-sized half-round cushions. You can freely configure the dimensions (width and depth), thickness, and color.
The cover is equipped with a zipper, making it easy to remove the filling and machine wash the cover.
A wide selection of colors - almost 50 different fabrics are available.
Craftsmanship:
- Zipper for removing the foam insert (laundry, etc.)
- Welt seam as wide as the cushion's thickness
- Optional tie straps
- Zipper is incorporated into the curve
Determining the right dimensions - It's easy!
Our custom-made products are great and exclusive - almost any problem can be solved and nearly any issue can be handled satisfactorily with them.
However, the prerequisite for this is correct measurements! Often there's a sense of unease when entering dimensions - have I measured everything correctly, have I considered all the factors, or did I forget something?
In our Info Center, we have compiled measurement instructions for all our products. We have tried to include all customer inquiries we have collected over time. Here you will find the appropriate instructions for your desired product:
Filling:
For our half-round seat cushions, we use a durable foam core that is wrapped with thermal fleece. By using these two components, our half-round seat cushions are snug and soft, keep you warm, and provide stable support at the same time.
We offer our half-round pads in thicknesses of up to 16 cm (6.3 inches).
Filling Raw Materials
- Seat: Foam RG - 35/40
- Back: Foam RG - 19/30
- Thermo Fleece: 0,5 cm / 0.2 inch thickness - 50 gr/m²
Filling Texture
- 1.6 inch / 4 cm variant corresponds to 1.6 inch / 4 cm foam, encased with 2 x 0.2 inch / 0,5 cm fleece
- 2.4 inch / 6 cm variant corresponds to 2.4 inch / 6 cm foam, encased with 2 x 0.2 inch / 0,5 cm fleece
- 3.2 inch / 8 cm variant corresponds to 3.2 inch / 8 cm foam, encased with 2 x 0.2 inch / 0,5 cm fleece
- 3.9 inch / 10 cm variant corresponds to 3.9 inch / 10 cm foam, encased with 2 x 0.2 inch / 0,5 cm fleece
- 4.7 inch / 12 cm variant corresponds to 3.9 inch / 10 cm foam, encased with 2 x 0.6 inch / 1,5 cm fleece
- 5.5 inch / 14 cm variant corresponds to 4.7 inch / 12 cm foam, encased with 2 x 0.6 inch / 1,5 cm fleece
- 6.3 inch / 16 cm variant corresponds to 5.5 inch / 14 cm foam, encased with 2 x 0.6 inch / 1,5 cm fleece
- 7 inch / 18 cm variant corresponds to 6.3 inch / 16 cm foam, encased with 2 x 0.6 inch / 1,5 cm fleece
- 7.9 inch / 20 cm variant corresponds to 7 inch / 18 cm foam, encased with 2 x 0.6 inch / 1,5 cm fleece
Dralon - Premium Outdoor Fabric
Thanks to its excellent properties, Dralon fabrics are used in many areas (indoors and outdoors, sportswear and workwear, fashion industry, baby and children's clothes, etc.).
Indoors, the fabric is used for blankets, furniture, upholstery and curtains, as well as carpets and table linen.
Outdoors, Dralon fabrics particularly show off their advantages. Brilliant colors, easy care, UV resistance and a pleasant feel comparable to cotton fabric. At the same time, Dralon fabric is very durable and long-lasting. Dralon® is well equipped against mold and bacterial attack.
The fabric exhibits the following properties:
- Lightweight and wool-like material
- Durable and breathable
- Resistant to abrasion and sweat
- Easy care
- UV resistant
- Stain protection through Teflon coating (dirt and water repellent)
- Does not shrink after washing
The Dralon fabric has a high degree of color fastness. More information on light fastness can be found here
Despite the Teflon coating (stain protection), the Dralon fabric is breathable - in the upholstery area, this prevents sweating and in the sun protection area, it prevents the formation of condensation and therefore mold.
|
Dralon® – high-quality outdoor fabric made of 100% acrylic. Here are the technical data | |
| Teflon coating – dirt and water repellent. Healthwise harmless, equips the fabric with stain protection. | |
| High light fastness – depending on the color, light fastness factor of 5 to 7 Here are the technical data | |
| Best CO2 balance worldwide in the production of acrylic fibers | |
| Extremely low water consumption in production (ONLY 0.07% compared to the production of cotton fabric). | |
| Durable and sustainable – 100% recyclable and 90% less production waste in the spinning process. | |
| Highest quality – Dralon fibers made in Germany! All our Dralon fabrics are certified according to Öko-Tex Standard 100 (MADE IN GREEN) |
Care Instructions
Care for removable covers:
- Remove the inner part and close the zipper
- Wash the cover at 40°C in the gentle cycle, without fabric softener in the washing machine
- Do not bleach, please use commercial detergent
- Soak heavily soiled items briefly
- Put the covers back on immediately after washing while they are still damp - this way the pad retains its shape
- Use dryer only at low temperature
- Fabric can be ironed at 150°C
Care for quilted cushions:
- Wash the pad at 30°C in the gentle cycle, without fabric softener in the washing machine
- Do not bleach, only use commercial detergent
- Soak heavily soiled items briefly
- Do not use a dryer
| Max. washing temperature - 40 °C. Only fill the washing machine halfway. Set to easy-care wash program. Do not spin or only spin briefly. | |
| Do not bleach. Only use bleach-free detergents (e.g., color detergent). Use stain removers with caution and only apply to concealed areas. | |
| Iron at medium setting. Maximum ironing temperature - 150 °C. Iron with a damp cloth or with steam. Avoid heavy pressing and distortions. | |
| No dry / chemical cleaning. Do not use solvents. Do not use solvent-based cleaners for stain removal. | |
| Gentle drying. Use dryer with caution. Set the appropriate program for gentle drying. Max. temperature 60 °C. |
- Dimension: Customizable Dimensions
- Design: Box Cushions
- Cover: Water Repellent
- Application Area: Indoor & Outdoor
- Form: Half Round
- Material: Dralon
- Fabric Design: Free Selectable
- Usage: Seat
